464
: Fair to excellent corrosion resistance. Excellent hot workability and hot forgeability. Fabricated by blanking, drawing, bending, heading and upsetting, hot forging, pressing.
Applications: aircraft turnbuckle barrels, balls, bolts, marine hardware, nuts, propeller shafts, rivets, valve stems, condenser plates, welding rod.
510
: Good to excellent corrosion resistance. Excellent cold workability. Fabricated by blanking, drawing, bending, heading, and upsetting, shearing, roll threading, knurling and stamping.
Applications: bellows, bourdon tubing, clutch discs, cotter pins, diaphragms, fasteners, lock washers, wire brushes, chemical hardware, textile machinery, welding rod. Available as flat products, wire, rod, and tube.
Trace content of Phosphorus.
660
: Casting methods recommended for this alloy: Centrifugal, Continuous, Permanent Mold, and Sand.
Applications: General-utility bearings and bushings, automobile fittings.
Classified under: High-leaded tin bronzes. ASTM B584; formerly ASTM B144-3B
Typical data for sand-cast test bars. Alloy does not respond to heat treating
841
: Oil impregnated bearing products made by a powder metallurgy process, allowing close control on the manufacturing process. They contain large interconnected pores to channel lubricants to the areas between shaft and bearing. It is used in appliances, business machines, cylinders, exercise equipment, lawn and garden equipment, medical applications, material handling, packaging and printing machines, and tools.
863
: Casting methods recommended for this alloy: Centrifugal, Investment, Plaster, and Sand.
Applications: Extra heavy duty, high strength alloy. Large valve stems, gears, cams, slow-speed heavy-load bearings, screwdown nuts hydraulic cylinder parts.
Classified under: Manganese and leaded manganese bronze alloys. ASTM B22; ASTM B584; formerly ASTM B22-E; ASTM B147-8C
As cast values below are for sand casting. Alloy does not respond to heat treating. Casting shrinkage allowance is 2.3%
932
: Casting methods recommended for this alloy: Centrifugal, Continuous, Permanent Mold, and Sand.
Applications: General-utility bearings and bushings, automobile fittings.
Classified under: High-leaded tin bronzes. ASTM B584; formerly ASTM B144-3B
Typical data for sand-cast test bars. Alloy does not respond to heat treating
954
: Good wear resistance, heat treatable. Except where noted, all property values are for sand casting.
Recommended Casting Methods: Centrifugal, Continuous, Permanent Mold, Plaster, and Sand.
Applications:Pump impellers, bearings, gears, worms, bushings, valve seats and guides, rolling mill slippers, slides, nonsparking hardware.
Classified under: Aluminum bronzes. ASTM B148; formerly ASTM B148-9C