Hot Rolled Steel C1018/20

Typical Applications:

• Gears
• Pinions
• Worms
• King pins
• Chain pins
• Ratchets
• Dogs
• Oil tool slips and liners
• Studs
• Anchor pins
• Special bolts
• Tie rods
• Any carburized parts requiring hard surface and soft core.

Analysis: C – .15/.20 Mn – .60/.90 P – .04 Max. S – .05 Max.

Mechanical Properties: (following values are average and are representative)

Machinability: 78% of B1112

Weldability: Easily welded by all welding processes, and the resultant welds and joints are of extremely high quality. Grade of welding rod used depends on welding conditions such as thickness of section, design, service requirements, etc.

Forging: Heat to 2150º – 2250º F.

Normalizing: Heat to 1650º – 1750º F.

Annealing: Heat to 1550º – 1650º F. Cool in furnace.

Hardening: This grade will respond to any of the standard carburizing methods and subsequent heat treatments. For a hard case and a tough core, carburize at 1650º – 1700º F for approximately 8hrs, cool in box, reheat to 1400º – 1450º F, quench in water and draw at 300º – 350º F.