Stainless Steel 416
Grade Summary: A Chromium grade of stainless steel with phosphorous and sulfur added to improve machinability. Most readily machinable of the stainless grades. It is magnetic in all conditions and capable of a wide range of mechanical properties by heat treating. This grade is available in precision-ground pump shafting.
Typical Applications: Pump shafts and parts in machinery used in or around fresh water, food acids, and neutral and basic salts.
Available products: Round Bar and Hexagonal Bar
Typical Chemical Analysis:
- * C – .15 Max. *Mn – 1.25 Max. *P – .06 Max. *S – .15/.40 Max.
- *Si – 1.0 Max. *Cr – 12.00/13.50 *Ni – .75 *Cu – .50 Max. *Mo – .60 Max.
Typical Mechanical Properties**:
|Cold Finish (under 1⁄2” dia)||Cold Finish (over 1⁄2” dia)||Hot Rolled|
|Tensile Strength (PSI)||90-125,000||75,000 Min.||75-115,000|
|Yield Point (PSI)||45,000 Min.||30,000 Min.||30,000 Min.|
|Elongation||35 Min.||35 Min.||40Min|
* Chemical Analysis will vary on each heat number
** All values are minimum values and are representative.
*** % in 2″
Get a Quote Fast
Visit the Metal GlossaryGo Now